FEP RoHS Compliant Tubing Eliminates Mercury Emissions

Parker TexLoc Atlantic Tubing

Design & Manufacture
Fluoroplastic Tubing and Heat Shrink
PTFE, PFA, FEP, MFA, THV, ETFE, ECTFE, PVDF, PEEK™, ULTEM®
Phone: 1-800-423-6551 * Fax 1-800-438-9562
Email:texloc@parker.com

pfa tubing products

ISO 9001 tubing

 
If you have any problems with the menu, please refer to the links at the bottom of the page or the Site Map                                              PARKER SAFETY BULLETIN
 
 Go Back

 

 

Flexible FEP Corrugated Tubing
Turns Sharp Corners Without Kinking

 

Ft. Worth, TX – October 25, 2009 – Tex-Flex™ FEP corrugated tubing from Parker-TexLoc is capable of turning sharp corners with very small bend diameters without kinking. In fact, the bend diameter is almost 4x smaller than a typical smoothbore tube of the same size. Increased bend diameters allows the tubing to work well in confined spaces, wrapping around machine legs and other obstacles that would normally restrict or kink a smoothbore tube.

Tex-Flex™ corrugated tubing is lightweight, seamless and extremely clear, allowing operators to monitor any material passing through the tube. The non-stick surface allows for easy cleaning and bacteria free transport of media. "Tex-Flex™" FEP corrugated tubes have a maximum continuous operating temperature up to 200°F/93°C @ 0 pressure. It is often used as an electrical insulator or fluid conduit with robots that have flexible arms to deliver electrical wiring, air, or corrosive liquids. In semiconductor applications, such as wafer machines, Tex-Flex™ is offered in a high purity PFA. High purity PFA has a maximum continuous operating temperature up to 300°F/148°C @ 0 pressure. For higher-pressure applications, the tubes can be stainless steel braided.

Sizes range from ¼” inch up to 2” and tubing is priced according to material, size, configuration and quantity. Samples, price quotations and literature are available upon request.

With annual sales exceeding $10 billion, Parker Hannifin is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets. The company employs approximately 52,000 people in 48 countries around the world. Parker has increased its annual dividends paid to shareholders for 53 consecutive years, among the top five longest-running dividend-increase records in the S&P 500 index. For more information, visit the company's web site at http://www.parker.com, or its investor information site at http://www.phstock.com.
 

 

For More Information Contact:

Janine Kruit, Marketing
Parker / TexLoc
Parker Hannifin Corp., Parflex Division
4700 Lone Star Blvd.
Ft. Worth, Texas 76106
(800) 423-6551 Fax (800) 438-9562
email: texloc@texloc.com
www.texloc.com

 

   

 

Go Back

Parker-TexLoc,  Mfr. of Precision Fluoroplastic Tubing & Heat Shrink
4700 Lone Star Blvd.   Fort Worth, Texas  76106 U.S.A.   Telephone:  817-625-5081 
U.S.A.  800-423-6551  Fax:  817-624-9095   U.S.A.  800-438-9562  Email: texloc@parker.com
 

Back To Top
 

Fax machine is available 24 hours per day, 7 days a week.  Fax your orders & inquiries 1-800-438-9562

Site Map Contacting Us What's New Directions Forum PTFE Tubes FEP Tubes PFA Tubes  PEEK Tube Beading Heat Shrink  Services Convoluted Tubes Mil-Spec Convoluted Corrugated Tubes Liners Ultra Pure  Shapes Medical Tube Conductive Tube Conversion Chart   FAQ  PressReleases  Materials  Technical Terms  Resources

Ultem® is registered trademark of GE Polymers.  PEEK™ is a registered trademark of Victrex  
Send mail to jekruit@parker.com with questions or comments about this web site.  Last modified: October 09, 2008

Copyright 1997-2008 @Parker-TexLoc  - All rights reserved                Parker-TexLoc is an EEO employer