|
Design & Manufacture
|
|
|
| If you have any problems with the menu, please refer to the links at the bottom of the page or the Site Map PARKER SAFETY BULLETIN |
TEXfluor® Fluoroplastic PTFE Liners | ||
| All of the fluoroplastic tubing available from TexLoc
are suited for use as a liner but TexLoc also offers heavy duty liners with an increased wall thickness to handle very corrosive liquids and gasses. These wall
thicknesses range from .050"/1.25mm up to .125"/3.17mm depending on the
application. Most are used to line flexible stainless metal hoses or rigid pipe. TexLoc TEXfluor® PFA and PTFE liners are available in natural or statically dissipative to prevent the build up of static charges and reduce the static electricity on the surface of rollers. We refer to these liners as conductive liners. |
![]() | |
| TEXfluor® PTFE Conductive liners are offered with a conductive I.D. or in a fully conductive liner. Liners with a
conductive I.D. are black on the inside and have a gray blue appearance on the outside. Fully conductive liners are black. For more
information on what conductivity is, see
Conductive
Fluoroplastic Tubing. TexLoc liners are also offered in TEXfluor® FEP and PVDF. | ||
| Go Back |
Parker-TexLoc, Mfr. of Precision Fluoroplastic Tubing & Heat Shrink |
| Back To Top | |
|
Fax machine is available 24 hours per day, 7 days a week. Fax your orders & inquiries 1-800-438-9562 |
|
|
Site Map
Contacting Us
What's New Directions Forum PTFE Tubes FEP Tubes
PFA Tubes PEEK
Tube Beading
Heat Shrink Services
Convoluted Tubes
Mil-Spec Convoluted
Corrugated Tubes
Liners
Ultra Pure
Shapes
Medical Tube
Conductive Tube
Conversion Chart
FAQ
PressReleases
Materials
Technical Terms
Resources
Ultem® is registered trademark of GE Polymers. PEEK™ is a registered
trademark of Victrex Copyright 1997-2008 @Parker-TexLoc - All rights reserved Parker-TexLoc is an EEO employer | |